fill rate ，大家看下面的PPT的時候，先簡單普及一下為啥要提高fill rate，簡單來說在一個庫房，放的越多成本越低。在單位面積下，放50本書，和放150本書，大家就好理解了。在一個庫房，它為了滿足顧客的需求，它存放的商品的種類越多越好，這樣可以滿足不同客戶的喜好。

項目背景

項目目的是在填充率指標之間取得平衡的最佳狀態，然后根據bin類型提高最佳填充率水平，達到2017年目標，主要項目目標為:

-分析一期工程的影響數據，包括正常期和高峰期的填充率水平;

-以每一種倉型為填充率目標，分析并嘗試運行最佳工況;

-嘗試研究每個FC中不同倉型的填充率提升方案。

The project purpose is to get best conditions which is balanced of fill rate and metrics impact, and then to improve the best fill rate level by bin type to reach 2017 year goal, the mainly project targetare:

-To analyze the impact data btw normaland peak period fill rate level as the Phase I works;

-To analyze and try run for the bestconditions by each bin type as the fill rate goal;

-Try to research/study some solutions forfill rate improvement by different bin type in each FC.

Especiallythanks to XiaominG/Cacy/Wu,fei/Kathy/Wei,xing, and all FC POCs great supports and helps. Thank you all.